H 601

band saws, twin pillar, semi-automatic, steel and aluminum cut, miter

Semiautomatic twin column bandsaw, hydraulically driven. Especially adapt to cut sections of steelwork, tubes and solids.

• Possibility to make cuts with variable angle up to 60° to the left, with the manual shifting of the saw frame.
• Steel sawframe with tubular section; worktable supported by a central pivot with preloaded bearings.
• Sawframe movement onto an electro welded column of big dimension, through two recirculating ballscrews linear guides.
• Pulley diameter 520 mm. Long-Life monobloc motoreducer.
• Registrable band guides with hard metal pads and guided bearings.
• Electronic Inverter for variable blade speed.
• Automatic control of the beginning and end cut through a feeler pin; regulation of the descent of the arc and strength of the penetration through the console.
• Mechanical tensioning of the blade with a control micro switch.
• Sawframe canted 6° allows sawblade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
• Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180x100 mm.